VR
FAQ

6082-T6 Aluminum Round Bar Price List

2026-11-20
12
Share :

Looking for the latest 6082-T6 aluminum round bar price? GNEE supplies 6082-T6 aluminum round bar in common extruded diameters for structural frames, machining parts, molds, shafts and industrial equipment. The price below is based on the SMM A00 aluminum price and is shown in both RMB and USD.

 

SMM Aluminum Price Basis

 

On November 19, the SMM A00 aluminum ingot price settled at an average of 22,280 CNY per tonne, down 260 CNY from the previous trading day, with the day’s range at 22,260 to 22,300 CNY per tonne. The 6082-T6 aluminum round bar price in the table below uses this SMM A00 price as the raw material base, plus a conversion premium that covers extrusion, T6 heat treatment, straightening, cutting and packaging. The premium depends mainly on diameter: small-diameter bars cost more per kilogram to produce, large-diameter bars cost less.

 

Reference exchange rate: 1 CNY = 0.150 USD (1 USD ≈ 6.665 CNY, spot close of November 19). For quotation reference only, subject to the real-time exchange rate.

 

6082-T6 Aluminum Round Bar Price List — RMB and USD

 

Reference factory prices, 6082-T6 aluminum round bar, 3000–6000 mm lengths
No. Product Temper Diameter (mm) Length (mm) Weight (kg/m) Date Price (CNY/kg) Price (USD/kg)
1 Aluminum round bar T6 10 3000–6000 0.21 2026-11-19 27.5 4.13
2 Aluminum round bar T6 20 3000–6000 0.85 2026-11-19 26.4 3.96
3 Aluminum round bar T6 30 3000–6000 1.91 2026-11-19 25.7 3.86
4 Aluminum round bar T6 50 3000–6000 5.30 2026-11-19 24.9 3.74
5 Aluminum round bar T6 80 3000–6000 13.57 2026-11-19 24.3 3.65
6 Aluminum round bar T6 120 3000–6000 30.54 2026-11-19 23.9 3.59
7 Aluminum round bar T6 160 3000–6000 54.29 2026-11-19 23.7 3.56
8 Aluminum round bar T6 200 3000–6000 84.82 2026-11-19 23.6 3.54
9 Aluminum round bar T6 250 3000–6000 132.53 2026-11-19 23.5 3.53
10 Aluminum round bar T6 300 3000–6000 190.85 2026-11-19 23.5 3.53

Weight is the calculated value for a solid round bar, π/4 × diameter² × 2.70 g/cm³. These are reference prices for standard extruded sizes: they move daily with the SMM A00 aluminum price and are adjusted for order quantity. Diameters, tempers or lengths outside the table are quoted per order. Prices are valid against the SMM A00 price on the order date, not the date you first saw this page.

What Affects the Price of 6082-T6 Aluminum Round Bar

Price factors for 6082-T6 aluminum round bar
Price Factor How It Affects the Price
SMM A00 aluminum price The raw material base. The aluminum price moves every trading day, so the bar price moves with it.
Diameter Small diameters carry a higher conversion premium per kilogram; large diameters are closer to the metal price.
Temper T6 requires solution heat treatment and artificial aging, so T6 costs more per kilogram than T651 or O temper material.
Length and cut-to-size Mill lengths cost less per kilogram; short cut pieces add sawing and handling cost.
Order quantity Larger orders reduce unit extrusion, heat treatment and packaging cost.
Tolerance and straightness Tighter diameter tolerance or straightness requirements add machining and inspection cost.
Surface finish Milled or polished surfaces cost more than as-extruded surfaces.
Testing requirements Additional mechanical testing, ultrasonic testing or third-party inspection affects the quotation.
Delivery terms FOB and CIF terms include different freight and documentation costs.

Processing Services for 6082-T6 Aluminum Round Bar

GNEE offers processing services that reduce your downstream machining cost:

  • Cut-to-length sawing from 3000–6000 mm mill lengths to your finished sizes.
  • End facing, chamfering and deburring.
  • Turning and milling for close-diameter or stepped shaft blanks.
  • Protective film, plastic end caps and individual bundling.
  • Special diameters and lengths produced to order, confirm before you design around them.

Quality Inspection of 6082-T6 Aluminum Round Bar

Each batch is supplied with an EN 10204 3.1 MTC covering heat traceability, chemical analysis and mechanical test results. Routine checks include diameter and straightness measurement, hardness and tensile testing to verify the T6 temper. Ultrasonic testing and SGS, BV or TUV third-party inspection are available on request. For mechanical minimums, EN 755-2 lists 310 MPa tensile and 260 MPa yield for 6082-T6 extruded rod up to 20 mm diameter; larger diameters follow the lower minimums in the standard table, so confirm the diameter row for your size.

Packaging of 6082-T6 Aluminum Round Bar

Bars are bundled with protective separators and steel straps, with plastic end caps on machined surfaces. Waterproof wrapping protects the bundle inside the container. Export wooden cases or pallets are ISPM 15 compliant when required, and each bundle carries a tag linking it to the heat number and the MTC.

Request a Quote for 6082-T6 Aluminum Round Bar

Commercial terms: MOQ flexible — both small trial orders and large-volume orders (full container loads, long-term contracts) are accepted. Lead time is 15–30 days. An EN 10204 3.1 MTC ships with every batch, SGS/BV/TUV third-party inspection can be arranged. Pricing follows the SMM A00 aluminum price on the order date and is quoted per order quantity and specification. We reply within 24 hours.

Ask for a quote with your 6082-T6 aluminum round bar specification — diameter, temper, length, quantity and destination port.

 

About GNEE

  • Established in 2008, exporting to more than 100 countries and regions.
  • One-stop aluminum supply: plate, coil, sheet, foil, round bar, square bar, hexagonal bar, pipe, tube and profile.
  • In-house processing: sawing, cut-to-size, milling, edge milling and film coating.
  • Export-standard packaging with full documents, including certificates of origin.

 

FAQ

How is the 6082-T6 aluminum round bar price calculated?
It starts from the SMM A00 aluminum price on the order date and adds a size-dependent conversion premium for extrusion, T6 heat treatment, cutting and packaging. Non-standard sizes are quoted per order.

What is the MOQ?
MOQ is flexible — small trial orders and large-volume orders are both accepted.

What diameters and lengths are available?
Common extruded diameters run from 10 mm to 300 mm in 3000–6000 mm lengths, cut to size on request. Confirm non-standard sizes before you design around them.

Related news
6063 & 6061 Aluminum Profile Prices — October 2026
2026-10-16
Pakistani Client Orders Honeycomb Aluminum Foil
2024-06-17
5086 aluminum alloy sheet
2025-09-24
8011 and 3003 aluminum foil lead the era of environmental protection
2023-12-12
Welcome Bangladeshi customers to visit us
2023-06-19
Household Foil 8011 Jumbo Rolls
2023-09-26
Aluminium EN AW 5083 H111
2025-09-12
Uprising this fall
2023-09-19
Contact with us
If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.